Scissors guillotine pneumomechanical ND3316AG

Scissors guillotine pneumomechanical ND3316AG

[cutting thickness 4th width of 2500]

Scissors of the series "-ND" - with manual control of a gap between knives and the manual drive of a back emphasis. The back emphasis is intended for installation of a given size of the cut-off preparation. Scissors of a series are reliable in work, are easy-to-work, simple under repair. Provide high precision of the cut-off preparations, details.

The lubrication system and electric equipments allows their operation in the conditions of low temperatures that is impossible during the work on hydraulic scissors. In view of lack of dribble of oil as it happens during the work on hydraulic scissors, purity of a working zone of scissors is provided.

Krivoshipny sheet scissors with an inclined knife of ND3316AG are intended for cutting of sheet metal with strength of 500 MPas and with the largest sizes of cross section 4,0kh2500mm.

Also cutting of the nonmetallic sheet materials excluding a fast zatupleniye of the cutting edges of knives and cracking of the cut leaf is possible.

Scissors find broad application in procuring shops of the enterprises of mechanical engineering, autotractor construction, aircraft industry, shipbuilding, agricultural mechanical engineering and other branches

Technical characteristics:
Name of parameters	Data
The largest sizes of the cut metal with a temporary resistance of 500 MPas (50 -¬úß/mm 2), mm:	4
thickness	2500
width	-
Frequency of the courses of a knife, mines – 1:	65
single	22
when cutting the largest sizes of the cut metal	-
Tilt angle of a mobile knife	1 °-19 ’-
The greatest length of the cut-off strip during the work with a back emphasis, mm	630
Overall dimensions of scissors in the plan, mm: at the left – to the right, in front – back (without lateral emphasis), height of scissors	3300х1630х1520
Height over floor level from the top edge of a motionless knife, mm	1520
Mass of scissors, kg	3870
Consumption of compressed air for one inclusion, l	0,25
Sort of current of a power line	Variable three-phase
Frequency of current, Hz	50
Tension, In	380
Number of electric motors	1
Sort of current of the electric drive of scissors	Variable three-phase
Tension of a power chain, In	380
Tension of a chain of management, In	24
Tension of a chain of lighting of the line of a cut, In	24
Quantity of points of lighting	3
Operating mode of the electric drive of scissors	Single and continuous courses, jog, manual pro-collar
Electric motor of the main drive:	-
type	4AMC132S4U3
power, kW	8,5
frequency of rotation, min. – 1	1395

 -

Technical characteristics:
Name of parameters	Data
The largest sizes of the cut metal with a temporary resistance of 500 MPas (50 -¬úß/mm 2), mm:	4
thickness	2500
width	-
Frequency of the courses of a knife, mines – 1:	65
single	22
when cutting the largest sizes of the cut metal	-
Tilt angle of a mobile knife	1 °-19 ’-
The greatest length of the cut-off strip during the work with a back emphasis, mm	630
Overall dimensions of scissors in the plan, mm: at the left – to the right, in front – back (without lateral emphasis), height of scissors	3300х1630х1520
Height over floor level from the top edge of a motionless knife, mm	1520
Mass of scissors, kg	3870
Consumption of compressed air for one inclusion, l	0,25
Sort of current of a power line	Variable three-phase
Frequency of current, Hz	50
Tension, In	380
Number of electric motors	1
Sort of current of the electric drive of scissors	Variable three-phase
Tension of a power chain, In	380
Tension of a chain of management, In	24
Tension of a chain of lighting of the line of a cut, In	24
Quantity of points of lighting	3
Operating mode of the electric drive of scissors	Single and continuous courses, jog, manual pro-collar
Electric motor of the main drive:	-
type	4AMC132S4U3
power, kW	8,5
frequency of rotation, min. – 1	1395

 -