(View map)
- Country of manufactureItaly
The angular window center with ChPU CRAFTER
Max. diameter of a saw: 400 mm rotation Frequency: 3000 rpm Length of a shiporezny spindle: 320 mm spindle Engine capacity: 9,2 kW
APPOINTMENT:
The processing center with ChPU Crafter is intended for production of standard and special windows and doors. Thanks to the software of WinCreator which is available in a car complete set there is an automatic accounting of separate components prior to their production.
SCOPE:
It is applied on small and average window and door productions.
PRODUCTIVITY:
Productivity makes about 10 - 15 single casement windows in change, using a traditional way of an external obgonka of window shutters after assembly.
SCHEME OF PROCESSING
-
DESIGN FEATURES:
The processing center with ChPU has the compact form and consists of shiporezny and main cars. Cutting of thorns is carried out at the same time on two preparations. Using the returnable conveyor (option) - the control of the machine one operator is possible. Cutting of thorns when giving the carriage forward and cutting of a counter - profile when giving the carriage back
-
-
In production of beds of both cars (a shiporez and a profiler) sheet steel with the strengthened stiffening ribs is applied to receive the monolithic compact car with a rigid and high - steady design which, in turn, will be able to resist to heavy loadings. All working units move on the first - class guides of swing, put in action through precision shariko - screw couple.
External processing of collected window shutters is carried out on special technology with use of a shiporezny spindle. The last corner of a window shutter is partially profiled on a shiporezny spindle to avoid chips on the last coal of a window shutter during external milling on perimeter. The operator does not need to use any piece of wood on the end of a window shutter as an anti - chip.
-
-
- Preliminary milling - - - - - - - - - - - - - External milling of a window shutter on perimeter of the last corner of a window shutter
-
CONFIGURATION of the Equipment
Detachable saw of ø - 400 mm, the engine capacity of 3 kW of Shiporeznaya the carriage with an inclination + / - 45 ° - the Emphasis with the digital counter the Shiporezny L=320 unit of mm, the engine capacity of 9,2 kW, 3000 rpm, max. diameter of the tool 320 Main L=320 Unit of Mm, the engine capacity of 7,5 kW, 6000 rpm Knot pieces of a shtapik, - the engine capacity of 2,2 kW, 6000 rpm the 4 - speed giving device with 6 wheels
-
Shiporezny carriage
-
The main car with the top milling unit
-
CRAFTER COMPLETE SET
Crafter E - - the car is delivered with the industrial BECKOHOFF personal computer with 12" - a touchscreen in the Windows CE, designed for industrial application which in addition includes:
The software in Russian the Computer controls sequence of shiporezny and main programs of the Program for external milling for perimeter of window shutters of WinCreator – the program for calculation of components of windows from templates of the Data Transmission of On - line windows from office in the car Automatically calculates the required length for inclined components
-
Technical characteristics: | |||||||||
NAME |
PARAMETERS |
||||||||
TORTSOVOCHNY KNOT: |
- |
||||||||
Max. diameter of a saw, mm |
400 (option 450) |
||||||||
Frequency of rotation, rpm |
3000 |
||||||||
|
120 |
||||||||
Engine capacity, kW |
3 (option 4) |
||||||||
|
100 |
||||||||
shiporezny spindle |
- |
||||||||
|
320 |
||||||||
|
320 |
||||||||
|
- |
||||||||
|
320 |
||||||||
|
9,2 |
||||||||
|
160 |
||||||||
shiporezny carriage |
- |
||||||||
|
2 - 25 |
||||||||
|
1 |
||||||||
|
+ / - 60 ° - |
||||||||
|
- |
||||||||
|
- |
||||||||
min. /max. width, - mm min. /max. height, mm |
- 220/2900 40/180 40/115 (option 140) |
||||||||
- MAIN SPINDLE |
- |
||||||||
High - precision linear support of swing for vertical and horizontal movements |
- |
||||||||
Useful length, mm |
320 |
||||||||
Course of a spindle, mm |
320 |
||||||||
Maximum diameter, mm |
240 |
||||||||
Engine capacity, kW |
7,5(OPTSIYA 9,2) |
||||||||
Diameter of an exhaust branch pipe, mm |
160 |
||||||||
KNOT SHTAPIK'S PIECES |
- |
||||||||
|
- |
||||||||
|
40 |
||||||||
|
6000 |
||||||||
|
200 |
||||||||
|
- |
||||||||
|
150 |
||||||||
|
40 |
||||||||
|
2,2 |
||||||||
THE GIVING DEVICE |
- |
||||||||
|
- |
||||||||
|
3 - 13 |
||||||||
|
120 |
||||||||
Engine capacity, kW |
0,75 |
||||||||
CONTROL SYSTEM |
|||||||||
The machine - is delivered with the program control controlled by the personal computer with 6,5" - a touchscreen which allows: - to Organize shiporezny programs (cutting of thorns) and main programs independently from each other - to Determine the correct sequence of shiponarezny and main programs for receiving the most effective production of components - Milling of window shutters by perimeter with automatic change of the program |
-
-
Technical characteristics: | |||||||||
NAME |
PARAMETERS |
||||||||
TORTSOVOCHNY KNOT: |
- |
||||||||
Max. diameter of a saw, mm |
400 (option 450) |
||||||||
Frequency of rotation, rpm |
3000 |
||||||||
|
120 |
||||||||
Engine capacity, kW |
3 (option 4) |
||||||||
|
100 |
||||||||
shiporezny spindle |
- |
||||||||
|
320 |
||||||||
|
320 |
||||||||
|
- |
||||||||
|
320 |
||||||||
|
9,2 |
||||||||
|
160 |
||||||||
shiporezny carriage |
- |
||||||||
|
2 - 25 |
||||||||
|
1 |
||||||||
|
+ / - 60 ° - |
||||||||
|
- |
||||||||
|
- |
||||||||
min. /max. width, - mm min. /max. height, mm |
- 220/2900 40/180 40/115 (option 140) |
||||||||
- MAIN SPINDLE |
- |
||||||||
High - precision linear support of swing for vertical and horizontal movements |
- |
||||||||
Useful length, mm |
320 |
||||||||
Course of a spindle, mm |
320 |
||||||||
Maximum diameter, mm |
240 |
||||||||
Engine capacity, kW |
7,5(OPTSIYA 9,2) |
||||||||
Diameter of an exhaust branch pipe, mm |
160 |
||||||||
KNOT SHTAPIK'S PIECES |
- |
||||||||
|
- |
||||||||
|
40 |
||||||||
|
6000 |
||||||||
|
200 |
||||||||
|
- |
||||||||
|
150 |
||||||||
|
40 |
||||||||
|
2,2 |
||||||||
THE GIVING DEVICE |
- |
||||||||
|
- |
||||||||
|
3 - 13 |
||||||||
|
120 |
||||||||
Engine capacity, kW |
0,75 |
||||||||
CONTROL SYSTEM |
|||||||||
The machine - is delivered with the program control controlled by the personal computer with 6,5" - a touchscreen which allows: - to Organize shiporezny programs (cutting of thorns) and main programs independently from each other - to Determine the correct sequence of shiponarezny and main programs for receiving the most effective production of components - Milling of window shutters by perimeter with automatic change of the program |
-
-
-
--