(View map)
- BrandKazstanex
- Country of manufactureTaiwan
Knot: 2 knots – a tortsovka, the Mill cup: 4 mills on 7,5 kW the Max. width of a groove: 220 mm network Tension: 380 V
APPOINTMENT:
The machine is intended for milling of angular connections with the purpose of receiving high-quality details of houses from the wall pro-thinned-out bar. This model developed on the basis of the similar Swiss and Italian equipment. When developing this machine shortcomings of the equipment of the previous generations were considered.
SCOPE:
The machine is used as independent technological unit at production of details from a wall bar at the enterprises for production of bar-shaped houses of various production capacity.
Processing of a bar happens for one pass.
DISTINCTIVE FEATURES:
- Electronic protection of electric motors -
- Hydropneumatic giving of milling knots -
- Milling groups are supplied with protective casings -
- Regulation of intercenter distance between couples of vertical and horizontal knots - on the mechanical counter with digital indication -
- The powerful pneumatic clip of preparations excludes detail shift in the course of milling -
- The accelerated withdrawal of vertical and horizontal milling supports due to adjustment of a pneumatic actuator of giving provides reduction of an operation cycle and increase in productivity of the machine.
- The big protection cover protects from noise and dust -
- Management of knots of the machine is brought to the forward panel -
- Safe start-up from 2 hands.
SAMPLE OF THE RECEIVED PRODUCTION
-
-
-
DESIGN FEATURES
-
-
KNOT OF MILLING OF A 4-SIDED GROOVE
The strengthened design of the milling unit allows to process preparations by section 245*250mm for one ustan of preparation.
Control of depth of milling is carried out on the mechanical counter -
The clip of preparation is carried out by two horizontal pneumatic clips + 2 vertical pneumatic clips + 1 vertical pneumoclip with the wide platform (length of 40 cm)
Movement of milling units is carried out gidropnevmatichesk with various speed of giving for one cycle:
Single movement of the milling unit is carried out with the increased speed,
Working movement with lower speed.
At the expense of the increased length of shaft installation of 2 tools on one shaft is possible that it allows to make processings like "-the Scandinavian chalet"-. -
-
-
SAW KNOT
It is intended for a fair tortsovka in the size of details from a wall bar. The plane of an end face of a detail is strictly perpendicular axes and is technological base when performing the subsequent technological operations.
Saw a disk in a delivery set.
-
Technical characteristics: | |||||||||
|
|||||||||
Diameter of a saw, - mm |
800 |
||||||||
The maximum section of processing, - mm |
245*250 |
||||||||
Power of saw knot, kW |
5,5 |
||||||||
Diameter of a spindle, - mm |
40 |
||||||||
|
|||||||||
The maximum section of processing, - mm |
245х250 |
||||||||
Quantity of vertical mills, piece. |
2 |
||||||||
Landing diameter of a shaft, - mm |
40 |
||||||||
The maximum diameter of vertical mills, - mm |
230 and-270 |
||||||||
Frequency of rotation of vertical mills, -об / mines |
2900 |
||||||||
Power of the drive, kW |
7,5х2 |
||||||||
Quantity of horizontal mills, piece. |
2 |
||||||||
The maximum diameter of horizontal mills, - mm |
180 and 230 |
||||||||
Landing diameter of a shaft, - mm |
40 |
||||||||
Drive power - - kW |
7,5х2 |
||||||||
Frequency of rotation of horizontal mills, -об / mines |
2900 |
||||||||
Adjustment of intercenter distance between couples of mills |
On the counter "-Siko" - |
-
-
Technical characteristics: | |||||||||
|
|||||||||
Diameter of a saw, - mm |
800 |
||||||||
The maximum section of processing, - mm |
245*250 |
||||||||
Power of saw knot, kW |
5,5 |
||||||||
Diameter of a spindle, - mm |
40 |
||||||||
|
|||||||||
The maximum section of processing, - mm |
245х250 |
||||||||
Quantity of vertical mills, piece. |
2 |
||||||||
Landing diameter of a shaft, - mm |
40 |
||||||||
The maximum diameter of vertical mills, - mm |
230 and-270 |
||||||||
Frequency of rotation of vertical mills, -об / mines |
2900 |
||||||||
Power of the drive, kW |
7,5х2 |
||||||||
Quantity of horizontal mills, piece. |
2 |
||||||||
The maximum diameter of horizontal mills, - mm |
180 and 230 |
||||||||
Landing diameter of a shaft, - mm |
40 |
||||||||
Drive power - - kW |
7,5х2 |
||||||||
Frequency of rotation of horizontal mills, -об / mines |
2900 |
||||||||
Adjustment of intercenter distance between couples of mills |
On the counter "-Siko" - |
-
-
-
-