(View map)
- BrandKazstanex
- Country of manufactureItaly
High - speed tortsovochny TRV1200S, 1200E line
Cutting of defective places of Tortsevaniye on given sizes of Tortsevaniye with optimization an operating mode Through passage Speed is up to 180 m/min.
APPOINTMENT:
The line is specially developed for high - performance cutting of defects (knots, pitch pockets, etc. ) from cut boards. On the line it is made both cutting of defective places and cutting of preparations at the programmed lengths.
SCOPE:
It is applied before the line of merging and before further processing to cutting of the set lengths at the enterprises and in shops on production of joiner's and pogonazhny products, furniture, glued products from wood, to wooden housing construction and at other woodworking and furniture enterprises.
Scheme of the line
-
-
Structure of the equipment and distinctive features
- The giving live rolls
- The structure of live rolls consists of steel pipes
- Transfer is carried out through a belt, with full protection. Rollers from galvanized steel, with a diameter of 60 mm, a step with an interval of 250 mm
-
- Bilateral marking table
- The tables for marking of boards regulated on width for work at the same time two operators
- The high - speed tortsovochny TRV 1200S and TRV 1200E machine - with function of full optimization
- The automatic electronic and programmable tortsovochny machine for cutting on tags (S) / with function of optimization of cutting on length (E)
- The possibility of programming of an initial and final cut + removal of defects + is sharp on given sizes
- 45 groups of lengths can be programmed, in each group on 199 sizes (E)
- It is also possible to sort by grades – up to 5 grades of quality (E)
- Optimization is made after partially or full scanning of preparation (E)
- The operator can put down priorities on lengths, grades or other values (E)
- An opportunity to set the minimum and maximum lengths, for example for the line of merging
- Reading of luminescent tags is carried out by the camera mounted on a machine entrance
- Giving of preparations from right to left by means of the motorized electronically controlled conveyor from two parts: before and after a saw disk
- Top a traverse with clamping rollers, regulated on height
- Vertical back and forth motion of a saw cloth with automatically controlled and adjustable amplitude of a raising
- System of fast braking and disinhibition of a saw with the device of protection against unauthorized operation of a brake
- Full protection
- Saw disk HM 500 - 35 - 120
- The saw with hard - alloy napayka, external diameter is 500 mm, internal – 35 mm, number of teeths 120
- Durability, balancing and noiselessness are specified to work at a speed of giving of a saw on preparation 85 m/s
Optional equipment:
- The driving giving roller table
-
-
Automatic loading station with razmetochny tables
-
-
Switchyard with pneumatic and/or air pushers
-
-
-
Technical characteristics: | |||||||||
Model |
TRV 1200E |
TRV 1200S |
|||||||
Live rolls length on an entrance, mm |
2500 |
||||||||
Length of marking tables on an entrance, mm |
2500 |
||||||||
Quantity of marking tables, piece |
2 |
||||||||
Maximum speed of giving, m/min |
180 |
150 |
|||||||
Cutting cycle speed, sec. |
0,1 - 1 |
||||||||
The minimum length of preparations on an entrance of the machine, mm |
450 |
||||||||
Thickness of preparations, mm |
8 - 50 (option 70) |
||||||||
Width of preparations, mm |
30 - 200 |
||||||||
The cross - sectional area of the processed preparation, mm 2 |
8000 |
||||||||
The maximum difference of thickness of the given in a row preparations, mm |
5 |
||||||||
The cut - off lengths from, mm |
20 |
||||||||
Height of a desktop, mm |
850 + - 20 |
||||||||
Rated capacity, kW |
7 |
||||||||
Overall dimensions, mm |
2400 x 900 x 1600 |
||||||||
Weight, kg |
1000 |
-
-
-
Technical characteristics: | |||||||||
Model |
TRV 1200E |
TRV 1200S |
|||||||
Live rolls length on an entrance, mm |
2500 |
||||||||
Length of marking tables on an entrance, mm |
2500 |
||||||||
Quantity of marking tables, piece |
2 |
||||||||
Maximum speed of giving, m/min |
180 |
150 |
|||||||
Cutting cycle speed, sec. |
0,1 - 1 |
||||||||
The minimum length of preparations on an entrance of the machine, mm |
450 |
||||||||
Thickness of preparations, mm |
8 - 50 (option 70) |
||||||||
Width of preparations, mm |
30 - 200 |
||||||||
The cross - sectional area of the processed preparation, mm 2 |
8000 |
||||||||
The maximum difference of thickness of the given in a row preparations, mm |
5 |
||||||||
The cut - off lengths from, mm |
20 |
||||||||
Height of a desktop, mm |
850 + - 20 |
||||||||
Rated capacity, kW |
7 |
||||||||
Overall dimensions, mm |
2400 x 900 x 1600 |
||||||||
Weight, kg |
1000 |
-
-
-
-